Tascam HS-2000 Owner'S Manual Download Page 100

Page: 100 / 156

100

TASCAM HS-2000

11 – Internal settings

In this chapter, we explain the internal settings of the unit

in detail.

Menu screen

Press the MENU key on the front panel to open the

screen as shown below.

REC SETUP button

Make recording settings.

PLAY SETUP button

Make playback settings.

SYNC T/C button

Make synchronization and timecode settings.

REMOTE SETUP button

Make settings for external remote control.

AUDIO I/O button

Make settings related to the input and output

audio signals.

METER SETUP button

Make level meter settings.

SYSTEM SETUP button

Make system settings.

VERSION INFO button

View the system version.

BROWSE button

View and perform operations on the folders and

files on CF cards and USB memory.

MEDIA MANAGE button

Perform operations, including copying and

formatting, on CF cards and USB memory.

OPERATION MODE button

Set the operation mode.

Recording settings (REC SETUP)

The

REC SETUP

screen has three tabbed pages:

REC

MODE

FILE FORMAT

and

OPTIONS

Touch a tab at the bottom of the screen to open the

corresponding page.

REC MODE page

Make settings related to the recording mode.

Confidence Monitor

Turn the confidence monitoring function, which

allows immediate playback of the recorded signal for

monitoring, ON (default) or OFF.

To use the confidence monitoring function, however,

the sampling frequency and number of tracks must be

set as follows.

Fs (sampling frequency)

44.1k, 48k, 48k–0.1% or

48k+0.1%

REC Mode

Single

NOTE

If the current project Fs setting is 88.2k, 96k, 176.4k or

192kHz, or REC Mode is set to Mirror, the Confidence

Monitor setting will be fixed to OFF.

REC Mode

Single

The unit records only to the currently selected CF

card (default).

Mirror

The unit records to both CF cards simultaneously.

NOTE

If the current project Fs setting is 88.2k, 96k, 176.4k or

192kHz, or Confidence Monitor is set to ON, the REC Mode

setting will be fixed to Single.

Summary of Contents for HS-2000





























































































































































Search results

Summary of Contents for HS-2000

Reviews:

Related manuals for HS-2000

Brands by name

Popular brands

Tascam HS-2000, Owner'S Manual

Search results

Summary of Contents for HS-2000

Reviews:

Related manuals for HS-2000

Brands by name

Popular brands