TallyGenicom Intelliprint 9035 User Manual Download Page 38

Page: 38 / 217

Feb 05

1-24

34PPM Laser Printer User Guide
Printing PCL and PostScript Font Lists

Printing PCL and PostScript Font Lists

Your printer has the capability of printing lists of all installed PCL or PostScript fonts. To print a
Font List, follow these steps:

From the Ready status, press MENU, the control panel display will read:

Paper Menu

Press PREVIOUS or NEXT until the display reads:

Functions

Press SELECT, the display will read:

Functions

Reset Printer

Press NEXT or PREVIOUS until the display reads:

Functions

Print Fonts

Press SELECT, the display will read:

Print Fonts

PCL Fonts

NOTE:

You may toggle between PCL Fonts and Postscript Fonts using the PREVIOUS or NEXT
push-buttons.

Press SELECT. A multi page resident Font List will print.

Turning the Printer Off

Make sure that the printer is not in processing.

Press the power switch to the <

{

> position to turn the power off.

Summary of Contents for Intelliprint 9035


























































































































































































































Search results

Summary of Contents for Intelliprint 9035

Reviews:

Related manuals for Intelliprint 9035

Brands by name

Popular brands

TallyGenicom Intelliprint 9035, User Manual

Search results

Summary of Contents for Intelliprint 9035

Reviews:

Related manuals for Intelliprint 9035

Brands by name

Popular brands