manualshive.com logo in svg

TallyGenicom Intelliprint 9035, User Manual

Share
Download
TallyGenicom Intelliprint 9035 User Manual Download Page 206

Feb 05

8-40

34PPM Laser Printer User Guide
Accessing the Printer Web Page

9.

The Date/Time Menu allows the user to access and change the Date.

10.

The Email Setup Menu allows you to configure the printer to send email messages when certain status 

conditions occur. .

Email Server Settings

1.

SMTP Server IP Address : Enter the IP address for the SMTP server that the printer will use to trans-

mitt the email messages.

2.

Enable Authentication: Check this box if the SMTP server requires authentication.

3.

User Name: (for Authentication) Enter the name of a user who is authorized to access the SMTP 

server.

4.

Password: (for Authentication) Enter the password for the user who is authorized to access the SMTP 

server.

5.

Printer Email Address: The character string configured here will be used in the “FROM” field of the 

email message. 

Summary of Contents for Intelliprint 9035


























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands