manualshive.com logo in svg

TallyGenicom Intelliprint 9035, User Manual

Share
Download
TallyGenicom Intelliprint 9035 User Manual Download Page 116

Feb 05

6-2

34PPM Laser Printer User Guide
Tray module (A4/550 sheets)

Available Optional Accessories

The following optional accessories are available for this printer. 

Tray module (A4/550 sheets)

Install the tray module to the printer to use the paper tray (A4/550 sheets). 

NOTE:

You can add up to two tray modules.

Installing/Uninstalling the Tray Module

The optional tray module (A4/550 sheets) is available for this printer. 

You can add up to two tray modules.

The weight of this printer, without the optional accessories, paper trays, consumables and paper, is 
21.0 kg. Before moving the printer, you must uninstall the optional accessories first. 

When lifting the printer, there should be 2 persons, 1 in front and 1 behind the printer, to firmly 
grip the recessed areas provided on both sides of the printer. Never try to lift the printer by grip-
ping any other areas. Lifting the printer by gripping any other areas can cause the printer to fall and 
result in injuries. 

CAUTION: Be sure to switch off the power and unplug the power cord from the outlet before car-
rying out the operations. If not, you might get an electric shock.
When lifting the machine, get a firm footing and bend your knees to avoid possible injuries to 
your back.

Summary of Contents for Intelliprint 9035


























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands