manualshive.com logo in svg

TallyGenicom Intelliprint 9035, User Manual

Share
Download
TallyGenicom Intelliprint 9035 User Manual Download Page 23

Feb 05

34PPM Laser Printer User Guide

1-9

Installation Procedure

■

Do not touch the surface of the photosensitive drum. Do not stand or place the Toner Car-

tridge upside down. The drum might get damaged. 

■

A drum shutter protects the photosensitive drum from light. Do not open the drum shutter. 

■

Although the toner is not harmful to the body, wash it off immediately if your hands or 

clothes are stained with it. 

■

It is recommended to use up the Toner Cartridge within 1 year after opening it.

NOTE:

See “Replacing the Toner Cartridge” on page 5-4

 for details when replacing the Toner 

Cartridge.

1.

Open the top cover. 

NOTE:

Do not touch any parts inside the printer. 

2.

Take the Toner Cartridge out of the box and shake it 7 to 8 times as shown in the diagram. 

Summary of Contents for Intelliprint 9035


























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands