Tally Xpress T8016, User Manual

Page: 96 / 174

Solving Problems 90
Printing Quality
Symptom Cause Solution
Vertical
white lines
appear in
image.
The imaging unit,
transfer roller, or fuser
unit are is
misinstalled, old, or
damaged. Confirm the proper installation of the items,
and check them for damage. If necessary,
replace them.
Image is
too light;
there is low
image
density. The media is moist
from humidity. Remove the moist media and replace with
new, dry media.
One or more toner
cartridges are
defective. Remove the toner cartridges and check for
damage. If necessary, replace them.
The imaging unit is old
or damaged. Remove the imaging unit and check for
damage. If necessary, replace it.
Media type may be set
incorrectly. Envelopes, glossy stock (set as Thick 2 or
Thick 3), labels, and thick stock have to be
set in the correct mode. Use approved
media. See “Media” on page 36.
The printer is
connected to an outlet
with a voltage or
frequency that does
not match the printer
specifications. Use a power source with the proper
specifications.
Driver settings are
not correct. Confirm that you are using the correct
driver settings.
Media is the wrong
size. Check with your documentation to confirm
the correct media size and type.
Unsupported media is
being used. Use approved media. See “Media” on page
36.