Tally T6215, Maintenance Manual

Page: 29 / 164

2–3
Chapter 2. Menu Operations
Report
This parameter has fifteen selections. The selections Current Config, All Configs, Configs 1-10
and Calibrations generate printouts. The second pair of reports (LastFault and Version) are
displays. The Report Parameter is located in the Config Menu, under the Printer Category.
Report selections
Configs Prints a report showing the setups of the configurations.
Calibrations Prints a report showing the current values of the Paper Out and Paper Motion
sensors and the hammer lead time and shuttle amplitude.
Last Fault The Control Panel Display shows the Last Fault that occurred.
Version The Control Panel Display shows the version number of the currently installed
firmware.
To clear the displays, depress any key on the printer control panel.
Selecting a Printer Report
Step 1. Take the printer Offline.
Step 2. Depress the Menu/Back key to enter the multilevel menu system, then scroll (
▲
Key)
to the Config menu. Press Enter
Step 3. Scroll (
▲
Key) until the Printer Category displays. Press Enter.
Step 4. Scroll (
▲
Key) until the Report Parameter is displayed. Press Enter.
Step 5. Scroll (
▲
Key) to the desired selection.
Step 6. Press Enter to begin the report printout or display.