Takeuchi TL8, Operator'S Manual

Page: 92 / 265

2-34
CONTROLS
LEVERS AND PEDAL
SAFETY BAR
• Before leaving the operator’s seat, raise
the safety bar to engage the lock and
stop the engine. If any controls are
accidentally touched when the safety
bar is not locked, the machine will
suddenly move and cause serious injury
or death.
• Be careful not to touch the control
levers and pedal when lowering or
raising the safety bar.
LEVERS AND PEDAL
This device is used to lock the functions of
control levers and switches listed below.
· Selector switch
· Detent mode switch
· Trip/Data switch
· High-flow switch
· Quick-hitch switch
· Ride control switch
· Aux. 2nd/14-pin connector select switch
When the safety bar is raised, the functions
of levers and switches are locked.
Note: The DPF auto regeneration may be
performed even when the safety bar is
raised.
THROTTLE LEVER (TL10/TL12)
This controls the engine speed.
(A) .......Low idling
(B) ......Maximum speed
THROTTLE PEDAL (OPTIONAL)
This controls the engine speed.
(A) .......Low idling
(B) ......Maximum speed