2-9
CONTROLS
EMERGENCY EXIT
Rear window
If you are trapped inside the cab, remove the
rear window to get out.
There are two ways to remove the rear
window.
In case of emergency
Kick off the rear window. Note that the glass
may break. Be careful not to get injured.
• If the glass breaks, it will shatter into
pieces. Take great care not to injure
yourself with them.
• Remove the glass pieces from the window
sill so as not to cut yourself when
evacuating. Broken glass will fall from the
window, so be careful of your footing and
do not slip on the glass.
When necessary
1. Pull off the ring (A) and remove the tip of
the rubber wedge.
2. Grasp the tip, pull and remove the entire
rubber wedge.
3. Pull the knob (B) toward you and remove
the rear window.
CAB
FUSE BOX
This box is used to protect the electric
system from overcurrent.
Opening
1. Loosen the screw and remove the cover
(1).
Closing
1. Tighten the screw on the cover.
Summary of Contents for TL8
