Takeuchi TL8, Operator'S Manual

Page: 161 / 265

5-13
MAINTENANCE
The material of the safety-critical part listed on the left tends to change over time and cause
wear or deterioration. It is difficult to determine the degree of deterioration at the periodic
inspection, and thus they need to be replaced with new ones after a certain time to maintain
their proper performance even if they appear in good condition. Note that regardless of the
replacement schedule, replacement must be performed immediately if a symptom of wear is
found. If a hose clamp is deformed or cracked, replace it together with the hose immediately.
When replacing the safety-critical parts, ask your sales or service dealer.
In addition to the safety-critical parts, inspect the hydraulic hoses and retighten or replace as
necessary. When replacing the hydraulic hoses, replace the O-rings and seals at the same
time.
Check the fuel and hydraulic hoses according to the periodic schedule described below.
Refer to “Maintenance”.
Type of inspection Inspection item
Daily inspection
Leakage from the connecting parts of hydraulic or fuel hoses
Damage to cab or canopy - replace*
Monthly inspection
Leakage from the connecting parts of hydraulic or fuel hoses
Damaged hydraulic or fuel hoses (cracks, wear and tear)
Annual inspection
Leakage from the connecting parts of hydraulic or fuel hoses
Deteriorated, twisted, damaged hydraulic or fuel hoses (cracks, wear
and tear) or hoses in contact with other parts of the machine
*: Canopy (TL8) part number: 06684-00012
*: Canopy (TL10) part number: 06884-03100
*: Canopy (TL12) part number: 06984-03100
*: Cab (TL8) part number: 06686-00034
*: Cab (TL10) part number: 06886-04100
*: Cab (TL10, with the polycarbonate front door) part number: 06886-06100
*: Cab (TL12) part number: 06986-08100
*: Cab (TL12, with the polycarbonate front door) part number: 06986-10100
SAFETY-CRITICAL PARTS