![background image](http://html1.mh-extra.com/html/takeuchi/tl8/tl8_operators-manual_3340166043.webp)
1-31
SAFETY
Explosionproof lighting
To prevent an ignition or explosion, use
explosion-proof lights when inspecting fuel,
oil, coolant or battery fluid. Otherwise,
explosion could result causing serious injury
or death.
AG7A067
PRECAUTIONS ON MAINTENANCE
Prohibit access by unauthorized persons
Do not allow unauthorized personnel in the
work area while working. Be careful when
grinding, welding or using a hammer. You
could be injured by flying debris from the
machine.
Prepare work area
• Select a firm, level work area. Make sure
there is adequate light and, if indoors,
ventilation.
• Clear obstacles and dangerous objects.
Eliminate slippery areas.
Always keep the machine clean
• Clean the machine before performing
maintenance.
• Stop the engine before washing the
machine. Cover the electrical parts so that
water cannot enter. Water on electrical
parts could cause short-circuits or
malfunctions. Do not use water or steam to
wash the battery, electronic control
components, sensors, connectors or the
operator’s compartment.
AG7A068
AG7A070
Summary of Contents for TL8
