![Takeuchi TL8 Operator'S Manual Download Page 34](http://html1.mh-extra.com/html/takeuchi/tl8/tl8_operators-manual_3340166034.webp)
1-22
SAFETY
Take care when handling unstable loads
Unstable loads such as round items,
cylindrical items, and stacked plates may fall
from the bucket. When handling unstable
load, do not raise the bucket too high or tilt it
backward too far.
Do not suddenly stop or lower the
working equipment
Sudden lowering or stopping of the working
equipment could cause the machine to react
and tip over. Operate the working equipment
carefully, especially when the bucket is
loaded.
Avoid overloading and off-center loading
Filling the bucket in excess of the rated
loading mass or loading an off-center load
could cause the machine to become
unstable and result in the machine tipping
over. Loading should be done evenly with a
load less than the rated loading mass (refer
to the table below).
TL8
Rated loading mass
955 kg (2105 lbs)
TL10
Rated loading mass
1090 kg (2403 lbs)
TL12
Rated loading mass
1285 kg (2833 lbs)
PRECAUTIONS WHEN OPERATING
Do not move the bucket over the heads of
people
The load spilling or the bucket dropping may
occur while the bucket is over the heads of
people.
Summary of Contents for TL8
