![Takeuchi TL8 Operator'S Manual Download Page 26](http://html1.mh-extra.com/html/takeuchi/tl8/tl8_operators-manual_3340166026.webp)
1-14
SAFETY
PRECAUTIONS WHEN
STARTING
Support your weight in a three point
secure stance when getting on/off the
machine
• Do not jump on or down from the machine.
Never attempt to get on or off the moving
machine.
• When getting on or off the cab, first fully
open the door to the locked position and
check that it does not move (for machines
with cab).
PRECAUTIONS WHEN STARTING
• Climb up/down the steps facing the
machine and holding the handrail to
support your weight in a three point secure
stance (hand and feet).
• Never use the safety bar or control levers
as hand holds.
• Do not go under the raised lift arms to get
in and out of the operator’s compartment.
Always lower the lift arms to the ground
beforehand.
Before starting the machine, ask any
unauthorized personnel to leave the area
Do not start the engine until you are sure it is
safe to start the machine by checking the
following items.
• Walk around the machine and warn the
person who is servicing the machine or is
walking near the machine. Do not start the
machine until you are certain that no one is
around the machine.
• Check if there is a “DO NOT OPERATE”
alert sign or similar sign is on the cab door,
controls or ignition switch. If there is one,
do not start the engine or touch any levers.
• Sound the horn to warn people around the
machine.
AG7A022
Summary of Contents for TL8
