Takeuchi TL8, Operator'S Manual

Page: 206 / 265

5-58
MAINTENANCE
INSPECTING AND REPLENISHING THE
WINDSHIELD WASHER FLUID
Choose ethyl alcohol as washer solution.
Do not use methyl alcohol as washer
solution. It could damage the eyes.
Use a windshield washer fluid designed
specifically for motor vehicles. Follow the
instructions included with the washer fluid.
WHEN REQUIRED
Inspection
1. Open the cab door.
2. Inspect the washer tank (1) and add
washer fluid if the level is low.
Replenishing
1. Mix the washer fluid to the prescribed
concentration.
2. Remove the cap (2) and add washer fluid.
Keep the dust away while replenishing the
washer fluid.
3. Install the cap (2).
LUBRICATING THE LEVERS
Set the machine to the parking posture,
stop the engine, remove the ignition key
and store it. Failure to do so may result in
the machine moving abruptly, leading to
serious injury or death.
If the levers no longer move smoothly,
grease them.
Control levers
1. Remove the lower mount section of the
boot (1) and turn it upward.
2. Wipe off the old grease.
3. Apply grease to points (A) and (B).
4. Set the boot (1) back as it was.