![background image](http://html1.mh-extra.com/html/takeuchi/tl8/tl8_operators-manual_3340166189.webp)
5-41
MAINTENANCE
CLEANING THE RADIATOR FINS AND
THE OIL COOLER FINS
• Wear required appropriate equipment
such as protective goggle and filter
mask when using compressed air, as
metal fragments or other objects can fly
and cause serious injury.
• Be sure to secure the rear door or
radiator before working the inside.
IMPORTANT: Be careful not to damage
the fins when cleaning.
• When using compressed air or
pressurized water, make sure the
pressure is no higher than 200 kPa (28
psi) and hold the nozzle sufficiently
away from the fins.
IMPORTANT: When using water, cover the
electrical system to prevent water from
getting in.
IMPORTANT: When operating the
machine in very dusty places, perform
inspection and maintenance operations
every day.
1. Open the rear door.
2. Blow compressed air on the fins to
remove mud and dirt stuck on them.
CLEANING THE CONDENSER (AC)
• Wear required appropriate equipment
such as protective goggle and filter
mask when using compressed air, as
metal fragments or other objects can fly
and cause serious injury.
• Be sure to secure the rear door or
radiator before working the inside.
IMPORTANT: Be careful not to damage
the fins when cleaning.
• When using compressed air or
pressurized water, make sure the
pressure is no higher than 200 kPa (28
psi) and hold the nozzle sufficiently
away from the fins.
EVERY 250 HOURS
1. Open the rear door.
2. Clean the condenser (1).
Note:
If the condenser is dirty, heat will not
discharge properly and the air conditioner
will not work efficiently.
Summary of Contents for TL8
