TAJIMA TFMX-IIC, User Manual

Page: 20 / 268

Important warning items for safe operation (UL and CSA-spec.)
6
Chapter 1
2.
Important warning items for safe operation (UL and CSA-spec.)
The following contents explains about UL, and CSA spec. machines.
IMPORTANT SAFETY INSTRUCTIONS
UL is safety standard applied to USA and CSA is safety standard applied to Canada.
Read all instructions before using this appliance
When using an electrical appliance, basic safety precautions should always be followed, including the
following:
To reduce the risk of electric shock:
An appliance should never be left unattended when plugged in. Always unplug this
appliance from the electric outlet immediately after using and before cleaning.
To reduce the risk of burns, fire, electric shock, or injury to persons:
Do not allow to be used as a toy. Close attention is necessary when this appliance is used
by or near children.
Use this appliance only for its intended use as described in this manual. Use only
attachments recommended by the manufacturer as contained in this manual.
Never operate this appliance if it has a damaged cord or plug, if it is not working properly,
if it has been dropped or damaged, or dropped into water. Please consult the nearest
authorized dealer or service center and use this appliance after the examination, repair,
electrical or mechanical adjustment has been made.
Never operate the appliance with any air openings blocked. Keep ventilation openings of
the sewing machine free from the accumulation of lint, dust, and loose cloth.
Keep fingers away from all moving parts. Special care is required around the sewing
machine needle.
Always use the proper needle plate. The wrong plate can cause the needle to break.
Do not use bent needles.
Do not pull or push fabric while stitching. It may deflect the needle causing it to break.
Switch the sewing machine off ("O") when making any adjustments in the needle area,
such as threading needle, changing needle, threading bobbin, or changing presser foot,
etc.
Always unplug sewing machine from the electrical outlet when removing covers,
lubricating, or when making any other user servicing adjustments mentioned in the
instruction manual.
(applied to UL-spec. and CSA-spec. machines)
DANGER
! !
WARNING
!