TAJIMA TFMX-IIC, User Manual

Page: 26 / 268

Inspection before starting work
12
Chapter 1
4.
Inspection before starting work
Before starting work, execute inspection (including cleaning, lubrication) of each part.
Place Checking
Covers Covers might be attached incorrectly.
Upper thread
The thread might be passed incorrectly to each part.
The tension might be inadequate.
The thread might be entwined around frame/drive system.
Under thread
The under thread (bobbin case) might not be set to rotary hook
correctly.
The tension might be inadequate.
Needle
The needle might be bent.
The direction of needle might have been wrong.
The needle might be broken.
Rotary hook( → p.227)
Cleaning/lubrication might be performed in inadequate
frequency.
Tension base switch( → p.66)
The switch of head to use might not be turned ON.
The switch of unused head might not be turned OFF.
Needle bar suspension lever
(
→ p.67)
Is the lever of head to use set to ON?
Is the lever of unused head set to OFF?
Middle thread guide adjusting lever
(
→ p.67)
Is position correct?
Jog remote-controller( → p.23) Is it contained in the pocket?
Tension base switch
Middle thread guide adjusting lever
Jog remote-controller
It corresponds only to some models.
Needle bar suspension
lever
(Equipped only 2 or more
heads machine)