TAJIMA TFMX-IIC, User Manual

Page: 19 / 268

Safety Precautions
5
Chapter 1
1
2
3
4
5
6
7
8
9
10
11
Control the operation noise in the environment.
This machine is designed to reduce noise during operation. To
improve the sound insulation performance in a factory still more, use
the interior finish materials which show high sound insulating
performance for the walls, ceiling, and floor of the factory.
Install the machine on a sturdy floor.
The floor structure must be strong enough to bear the machine weight
(indicated on the spec. plate).
Avoid dust and moisture.
Since dust and moisture lead to dirt and rust on the machine, use the
machine in an environment of facility of air conditioner, and clean the working
place periodically. Use caution not to expose the machine to direct wind from
the air conditioner so that embroidery threads do not become disheveled.
Humidity:
30 to 95% RH (relative humidity) without condensation
Ambient temperature:
5 to 40°C (during operation), -10 to 60°C (during storage)
Avoid direct sunlight.
If the machine is exposed to direct sunlight over an extended period of time,
the machine body may be discolored or deformed. Put curtains or shades to
prevent the machine from direct sunlight.
Provide enough space for maintenance.
Taking account of workability when maintaining and inspecting the machine,
provide 50 cm or more working area to right, left and rear directions of the
machine against obstacles such as walls.
Pay attention to interference of radio wave.
Although the machine is designed not to affect radio wave interference to
other equipments, there could be cases where it causes interference
depending on operation environment and type of other equipment. If such
problems arise, install the equipment with a space from the machine as big
as possible.
CAUTION
!
50 cm
50 cm 50 cm