TAJIMA TFMX-IIC, User Manual

Page: 234 / 268

220
Countermeasure when the machine stopped
Chapter 9
3BD
S
Refer to 3BD (MC) described above. Driver not
for the main shaft is connected.
Check and/or replace the main shaft driver.
3BD
X
Refer to 3BD (MC) described above. Driver not
for X-axis is connected.
Check/replace the X-axis driver.
3BD
Y
Refer to 3BD (MC) described above. Driver not
for Y-axis is connected.
Check/replace the Y-axis driver.
3BF Remaining number of beads cannot be grasped. Check and/or replace the head card.
3C1
Contact error of the bar switch or start/stop
switch, breakage of the switch harness, or bad
connection of the connector
Check the connector and the connecting
terminal.
Replace the limit switch/switch assembly.
3C3
Mis-setting of the number of heads in "Machine
Type"
Check the contents of setting.
3D6
There is abnormality in the program or in the
CPU card.
Check the CPU card.
The software is not installed normally. Install the software.
3DB Lack of system RAM capacity
Turn "OFF/ON" the power.
Replace CPU card.
3DC Abnormality of memory device
Turn "OFF/ON" the power. Install the software.
Replace the DOM or CPU card.
3DD Abnormal system installation
Install the software.
Replace DOM or CPU card.
3DE Abnormality of external memory device
Turn "OFF/ON" the power.
Check/replace the USB memory, or replace the
CPU card.
6D1 File error of frame drive parameter Install the software.
6D2 Disconnection of communication line
Turn "OFF/ON" the power.
Check harness connection between CPU card
and USB hub.
Check and/or replace power supply card.
Check and/or replace DC power supply.
Install the software again.
6D3
Disconnection of USB communication line in I/O
card, communication error
Turn "OFF/ON" the power.
Check connection of USB cable
Check and/or replace power supply card.
Check and/or replace DC power supply.
Install the software again.
No. Stop Factor How to restore