TAJIMA TFMX-IIC, User Manual

Page: 132 / 268

To increase embroidering efficiency
118
Chapter 5
8-2-2.
How to operate
The following is an example that Jump Code Combination is set.
(1)
To open screen
(2) To set Jump Code Combination
8-3.
To change moving speed of needle bar case (Color change speed)
This function applies to TFMX-C, TWMX-C only. When sequin device III is equipped, the machine does not
have this function.
8-3-1.
Screen
8-3-2. How to operate
The following is an example that Color Change Speed is set to "High".
(1) Press the F5 key within 10 seconds after turning ON the power, and keep on pressing the key. When the
window of "F5+PW" starts up, release it.
(2) To select color change speed
High: High speed (usual setting)
Low: Low speed
)
5 Jump Code Combination NO
YES
6(7 6(7
2 Color Change Speed
Low
High
6(7 6(7