TAJIMA TFMX-IIC, User Manual

Page: 177 / 268

To return the frame to the design start position
163
Chapter 6
1
2
3
4
5
6
7
8
9
10
11
4.
To return the frame to the design start position
4-1. To return the frame to the design start position manually (Return to the design start position)
This function makes the frame return to the design start position in the middle of embroidery when you
stopped the machine.
4-1-1.
Screen
4-1-2.
How to operate
The following is an example of executing design start position return.
(1)
To open screen
(2)
To execute design start position return
To return the frame to the design start
position
: Not to execute
: To execute
When performing this operation, do not put your hands etc. on the machine table. Moving
frame could injure you.
Pressing SET will move the frame. To
return to the original position, perform
"Manual offset".
(
→ p.156)
4 Return to the design start position
CAUTION
!
'
4 Return to the design start position
6(7 6(7