Tait TM9456 User Manual Download Page 57

Page: 57 / 129

Dual radio operation 57

The foreground radio is
either:

■

the radio currently show-
ing in the display, or

■

the radio showing in
larger text.

The background radio is the
radio not showing in the display,
or the radio showing in smaller text.

Dual radio display states and

descriptions

The following table lists various states of the radio
display, and the implications for transmitting and
receiving.

R1:Channel 12

R2:Channel 3

Display

Description

The radio system will receive
and transmit on the foreground
radio only.

The radio system will receive
on both radios, and transmit on
the foreground radio only.

The radio system will receive
and transmit on both radios.

R1:Channel 12

R2: Channel 3

R1:Channel 12

R2: Channel 3

Summary of Contents for TM9456


































































































































Search results

Summary of Contents for TM9456

Reviews:

Related manuals for TM9456

Brands by name

Popular brands

Tait TM9456, User Manual

Search results

Summary of Contents for TM9456

Reviews:

Related manuals for TM9456

Brands by name

Popular brands