Tait TM9456 User Manual Download Page 96

Page: 96 / 129

96 Emergency operation

Making a manual emergency call

Warning

You will not be able to make a voice call on

the channel until the 3-second emergency alarm has
finished.

Press and hold the emergency key for longer than
three seconds.

The radio gives three short beeps, rising in pitch.

Emergency

appears in the display, and remains

until the manual emergency call is cancelled.

If you receive an acknowledgement from another
radio in your group, the manual emergency call is
cancelled, and the message

Emergency Acked

briefly appears in the display.

Receiving a manual emergency call

When your radio receives a manual emergency call,

Emergency

appears in the display, along with the

identity of the radio that initiated the emergency call.

A loud repeating emergency alarm sounds for three
seconds. If location information has been sent,

Location

appears in the display.

Emergency

Emergency
Acked
NWME42T1

alias of

acknowledging radio

Emergency

NWBE22M1

Location

radio in

emergency

location information

available

Summary of Contents for TM9456


































































































































Search results

Summary of Contents for TM9456

Reviews:

Related manuals for TM9456

Brands by name

Popular brands

Tait TM9456, User Manual

Search results

Summary of Contents for TM9456

Reviews:

Related manuals for TM9456

Brands by name

Popular brands