Tait TM9456 User Manual Download Page 82

Page: 82 / 129

82 P25 services

Press

Send to

The red LED glows and a message appears in the
display.

If the other radio has received your request, it will
now call you, so that you can monitor activity near
the radio.

Radio inhibit and uninhibit

This feature is only available for digital channels
operating in conventional mode, and for radios
configured for dispatcher operation.

If you want to make another radio on the system
inoperable, you can use the radio inhibit feature. This
feature is also known as ‘stun’.

To the user of the inhibited radio, it appears as though
the radio has turned off. The radio remains inoperable
even if it is turned off and then on again.

The radio cannot return to operation until it receives
an uninhibit request. This is also known as ‘revive’.

Sending a radio inhibit request

Press

Menu

and select

Services

Radio inhibit

Radio monitor

Car 2

Car 3

Send to

Cancel

Sending
R.U.M to
Car 2

Cancel

Call received

Car 2

Summary of Contents for TM9456


































































































































Search results

Summary of Contents for TM9456

Reviews:

Related manuals for TM9456

Brands by name

Popular brands

Tait TM9456, User Manual

Search results

Summary of Contents for TM9456

Reviews:

Related manuals for TM9456

Brands by name

Popular brands