Tait TM9456 User Manual Download Page 6 | Manualshive

Page: 6 / 129

background image

6

Copyright and trademarks

All information contained in this document is the property of Tait
Limited. All rights reserved. This document may not, in whole or
in part, be copied, photocopied, reproduced, translated, stored, or
reduced to any electronic medium or machine-readable form,
without prior written permission from Tait Limited.

The word TAIT and the TAIT logo are trademarks of Tait
Limited.

All trade names referenced are the service mark, trademark or
registered trademark of the respective manufacturers.

Disclaimer

There are no warranties extended or granted by this document.
Tait Limited accepts no responsibility for damage arising from use
of the information contained in the document or of the
equipment and software it describes. It is the responsibility of the
user to ensure that use of such information, equipment and
software complies with the laws, rules and regulations of the
applicable jurisdictions.

Enquiries and comments

If you have any enquiries regarding this document, or any
comments, suggestions and notifications of errors, please contact
your regional Tait office.

Updates of manual and equipment

In the interests of improving the performance, reliability or
servicing of the equipment, Tait Limited reserves the right to
update the equipment or this document or both without
prior notice.

Intellectual property rights

This product may be protected by one or more patents or designs
of Tait Limited together with their international equivalents,
pending patent or design applications, and registered trade marks:
NZ 409837, NZ 409838, NZ 415277, NZ 415278, NZ 508806,
NZ 519742 / NZ 516280 , NZ 524369, NZ 524509, NZ 530819,
NZ 534475, NZ 547713, NZ 577009, NZ 579051, NZ 579364,
NZ 586889, NZ 610563, NZ 615954, NZ 700387, NZ 708662,
NZ 710766, NZ 711325 , NZ 714188, NZ 593887,
AU 2015215962, AU 339127, AU 339391, AU 2015904806,
AU 2016902579, EU 000915475-0001, EU 000915475-0002,
GB 2532863, US 20160044572, US 20160057051, US 640974,
US 640977, US 698339, US 702666, US 7758996, US 7937661,
US 8902804, US 9107231, US 14/834609 Div., US 20130010718,
US 20150085799, US 20150350090.

This product may also be made under license under one or more

«
...
4
5
6
7
8
...
»

Summary of Contents for TM9456


































































































































Reviews:

No comments

Related manuals for TM9456

Twintalker 7100

Brand: Topcom Pages: 22

Brand: MicRadar Pages: 13

Snozzer 10029134

Brand: auna multimedia Pages: 42

BELT-PAK 5 Series

Brand: EARMARK Pages: 2

Brand: Vitek Pages: 6

Brand: Pure Digital Pages: 18

Satellite Radio

Brand: Raritan Pages: 2

Brand: Insignia Pages: 29

Brand: Jensen Pages: 10

Brand: Dahua Pages: 21

Brand: HYT Pages: 32

Brand: Zodiac Pages: 60

Brand: Sangean Pages: 18

Brand: RoadCom Pages: 11

Brand: Zodiac Pages: 74

Brand: Hello Kitty Pages: 17

Brand: Monitor Audio Pages: 36

Brand: Aiwa Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands