Tait TM9456 User Manual Download Page 28

Page: 28 / 129

28 Basic operation

When the radio is first turned on, the red, green, and
orange LEDs flash, and the radio gives two short
beeps. A message briefly appears in the display.

Adjusting the speaker volume

The volume control also changes the volume level of
the radio’s audible indicators.

Standard control head

■

Rotate the volume control clockwise to increase
the speaker volume and counterclockwise to
decrease the volume.

The raised dot indicates the current volume setting.

Hand-held control head

■

Press

to increase the speaker volume, and

to decrease the volume.

Activating the external speaker

An external speaker is used to increase the volume of
the audio from the radio’s standard speaker.

To check the current state of the external speaker:

■

Short press the function key programmed for
external speaker.

The message

PA Speaker is active

(or

PA Speaker

is not active

) briefly appears in the display.

To turn on the external speaker:

■

Long press the function key programmed for
external speaker.

Summary of Contents for TM9456


































































































































Search results

Summary of Contents for TM9456

Reviews:

Related manuals for TM9456

Brands by name

Popular brands

Tait TM9456, User Manual

Search results

Summary of Contents for TM9456

Reviews:

Related manuals for TM9456

Brands by name

Popular brands