Tait TM9456 User Manual Download Page 18

Page: 18 / 129

18 About this guide

About this guide

This user’s guide provides information about the
TM9456 mobile radio.

The radio behavior described in this guide applies to
radios with firmware version 33.01.xx (where xx is the
current firmware version). To check the radio’s
firmware version, see

“Checking the version of a

radio” on page 116

. If your radio does not operate as

you expect, contact your radio provider for assistance.

Safety warnings used in this

guide

Within this user’s guide, the following warnings are
used to alert you to important safety information:

Warning

This alert is used when there is a hazardous

situation which, if not avoided, could result in death or
serious injury.

Caution

This alert is used when there is a hazardous

situation which, if not avoided, could result in minor or
moderate injury.

Notice

This alert is used to highlight information that

is required to ensure procedures are performed
correctly. Incorrectly performed procedures could
result in equipment damage or malfunction.

Related documentation

The following documentation is also available for your
Tait radio, which you can access from the Tait
Technical Support website (

http://

support.taitradio.com

■

Safety and Compliance Information

—supplied

with each radio. (The same information is included
in this user’s guide.)

Summary of Contents for TM9456


































































































































Search results

Summary of Contents for TM9456

Reviews:

Related manuals for TM9456

Brands by name

Popular brands

Tait TM9456, User Manual

Search results

Summary of Contents for TM9456

Reviews:

Related manuals for TM9456

Brands by name

Popular brands