Tait TM9456 User Manual Download Page 31

Page: 31 / 129

Basic operation 31

The message

Keypad locked

briefly appears in the

display, and

Unlock

appears above

, in place of

Menu

When any of the locked keys are pressed, the
message

Keypad lock active

appears.

To unlock the keypad:

■

Press and hold

for about one second.

Navigating the radio’s menus

Your radio has a number of menus available, each
containing lists or submenus. The menus available
depend on the way your radio is programmed.

Using the Main menu

To access the Main menu, press the right selection
key

whenever

Menu

appears above it.

Use the scroll keys

and

to move through the

menu list.

When the menu you want is highlighted, press

Select

to open the menu you have chosen.

Tip

To quickly exit the menu system, press and hold

when the word

Cancel

Back

appears above it.

Channel 12

Zone 11

Main menu

Zones

Talkgroups

Select

Back

Summary of Contents for TM9456


































































































































Search results

Summary of Contents for TM9456

Reviews:

Related manuals for TM9456

Brands by name

Popular brands

Tait TM9456, User Manual

Search results

Summary of Contents for TM9456

Reviews:

Related manuals for TM9456

Brands by name

Popular brands