T-Home Comfort Pro CM 500 User Manual Download Page 18

Page: 18 / 156

Installation

USB and External Charging Port

There is a mini USB port (2.0) on the lower right side of the mobile unit. It has two functions:

■

As an interface for connecting to the PC e.g. to load data to/from the device. When the mobile unit is

connected to a PC it is charged simultaneously. The charging process is slower, however, than when the

mobile unit is charged in the charger.

■

As a connection socket for a USB charger. This charging process is also slower than when charging in the

charger.

Be sure to use only a shielded USB cable.

Comfort Pro CM 510 – USB Port: Removing the Cover

The opening of the USB port is closed with an undetachable cover. If a USB cable is not used, please be sure

to close the opening to be sure the device can be operated in accordance with its protection class. Remove

the cover by tugging it out of the housing on the

upper

edge.

Never tug it out on the lower edge!

Setting Up and Connecting the Charger

“Comfort Pro CL 500”

As additional component you can purchase the

Comfort Pro CL 500

charger

(material no. 40246042).

Comfort Pro CM 500

: The mobile unit can be operated without changing the charger.

Comfort Pro CM 510

: When operating the mobile unit, you

have to remove the two lateral guides in the charger. These

are easy to lift up on the inner edge using a fingernail or a

paper clip.

Summary of Contents for Comfort Pro CM 500





























































































































































Search results

Summary of Contents for Comfort Pro CM 500

Reviews:

Related manuals for Comfort Pro CM 500

Brands by name

Popular brands

T-Home Comfort Pro CM 500, User Manual

Search results

Summary of Contents for Comfort Pro CM 500

Reviews:

Related manuals for Comfort Pro CM 500

Brands by name

Popular brands