T-Home Comfort Pro CM 500, User Manual

Page: 116 / 156

114
The Device Menu “System menu” / Total Menu
Note: If “Divert MSN” is executed in the exchange (= external call forwarding; configured by the
system administrator), it can take a few seconds after configuration for call forwarding to be activated
in the exchange.
Divert door (door call forwarding): This is where you can programme “Divert call immediately” for door
calls. If several doorbells are configured on the communications system, first select the doorbell
whose calls are to be diverted. The number of doorbells available and with which names they are
listed in the menu, depends on the type of entrance intercom. Consult your system administrator if
you have questions concerning the configuration of the doorbells.
Dest. : Enter the call number you wish to forward to (for entering the call number, please refer to the
chapter entitled External Seizure and Entry of Call Numbers starting on page 49).
On / Off : Switching call forwarding on or off. Active call forwarding is indicated by a “+” sign. This is
followed by the call forwarding destination.
Remote divert (call diversion for): You can also configure call forwarding for other Comfort Pro users.
Programming call forwarding for a virtual call number is also possible (please refer to Call for a
virtual call number on page 68 also). In order to do so, “Call forwarding for other user” authorisation
is required, otherwise this menu item will not be displayed. Also, you can configure call forwarding
only for those users whose terminal has not been blocked for this type of access (these users
themselves have authorisation to “Prevent call forwarding by other user”).
Number
: Enter the internal phone number you wish to forward.
or …
Phone book : You can find and select the desired call number in the communications system phone
book (see page 88).
The next steps are identical with programming call forwarding (see page 113).