T-Home Comfort Pro CM 500 User Manual Download Page 16

Page: 16 / 156

Installation

Inserting the Power Battery

Note:

If you require a spare battery or power battery with the necessary battery

compartment lid, please contact the Deutsche Telekom hotline on 0180 5 1990

during normal office hours. The call costs 0.14 EUR per minute or part thereof for a

call from the Deutsche Telekom fixed line network.

Mounting / Removing a Bracket

You can order a battery with greater charge capacity (power

battery) as an accessory. It is thicker which means you need a

different battery compartment lid which protrudes ca. 6 mm

on the rear side of the device.

Mount the new battery compartment lid as described above.

You should first remove a bracket if mounted.

Comfort Pro CM 500

The bracket that comes with the product is placed on the two

openings at the upper end of the mobile unit and snapped into

place by pressing on it. To remove the bracket, press in the

little recesses of the edge of the bracket and pull the bracket

apart somewhat.

Summary of Contents for Comfort Pro CM 500





























































































































































Search results

Summary of Contents for Comfort Pro CM 500

Reviews:

Related manuals for Comfort Pro CM 500

Brands by name

Popular brands

T-Home Comfort Pro CM 500, User Manual

Search results

Summary of Contents for Comfort Pro CM 500

Reviews:

Related manuals for Comfort Pro CM 500

Brands by name

Popular brands