T-Home Comfort Pro CM 500, User Manual

Page: 107 / 156

105
“Audio” Menu The Device Menu
Type : This setting is where you determine how selected melodies are signalled.
Repeat : The melody is played repeatedly as long as the call is signalled.
Single : The melody is played only once.
Device
: You can select the combination of signal generators with which the call will be signalled.
Press the
Edit
softkey to switch a signal generator on/off.
Ringer
: Signalling via loudspeaker.
Vibra call : Signalled via vibrator.
Headset : Signalled on the headset if this is connected to the mobile unit.
Note: If you switch off all signal generators, a call is only signalled optically on the display.
Volume : Displays the currently set ringer volume. For changing the volume, use the and
navigation keys or enter a number (1 … 7) ( Increasing or level 1…7).
Noise detection : When this feature is switched on, ringer volume is automatically increased
when ambient noises are loud. If you wish to use this feature, you should not set the ringer
setting volume at Increasing .
Attention tones : Select whether the respective attention tones are switched on or off.
Key click
: Acoustic confirmation of key press.
Confirm tones : Confirms successful/failed settings.
End of menu : Info tone when the end of a list/menu is reached.
Battery warning : Info tone when the battery has only low capacity remaining. There are just a few
minutes remaining before the connection is disconnected.
Coverage warning : Info tones when the radio connection threatens to break off.
Loud environment : If this setting is activated, the mobile unit attempts to improve voice transmission in a
loud environment (does not apply when operating a Bluetooth headset or in handsfree mode).