T-Home Comfort Pro CM 500, User Manual

Page: 131 / 156

129
“Security” Menu The Device Menu
Pre alarm : You can set the time interval to go by until the emergency call number is dialled. During
this time,there is a ring tone (alarm tone) signalled at increasing volume (unless deactivated).
During the prealarm, the alarm can still be cancelled ( Off , 10 sec … 60 sec).
Repeat alarm : This is the time interval after which another prealarm including subsequent dialling
of the alarm call number is executed, e.g. because calling the alarm call number was
cancelled ( Off , 5 sec … 240 sec).
Mandown alarm
Status : Shows whether mandown alarm is switched on or not. Press the
Edit
softkey to
switch on or off.
Delay : You can define the time how long the device is allowed to be out of the vertical
position without triggering a prealarm (1 sec … 60 sec).
No movement alarm
Status : Shows whether no movement alarm is switched on or not. Press the
Edit
softkey
to switch on or off.
Delay : You can define the time how long the device is allowed to be motionless without
triggering a prealarm (10 sec … 60 sec).
Sensibility : Set sensitivity ( Low , Medium , High ). This enables you to adapt the sensor to
various movements (e.g. manner of walking) of the supervisory personnel.
Escape alarm
Status : Shows whether escape alarm is switched on or not. Press the
Edit
softkey to
switch on or off.
Delay : You can define the time how long the device is allowed to be moved quickly without
triggering an alarm (10 sec … 60 sec).
Sensibility : Set sensitivity ( Low , Medium , High ). This enables you to adapt the sensor to
various movements (e.g. manner of running) of the supervisory personnel.