manualshive.com logo in svg

Symmetricom EDGE CLOCK 1000, User Manual

The Symmetricom EDGE CLOCK 1000 is a cutting-edge device that offers impeccable time synchronization. With its advanced features and precise timekeeping capabilities, this product ensures seamless integration into any network environment. Unlock the full potential of your device with the comprehensive User Manual, available for free download at our website manualshive.com.

Share
Download
background image

Chapter 6 Maintaining and Troubleshooting the TimeProvider

Manual Updates

192

 

TimeProvider User’s Guide

097-58001-02 Revision G – April 2008

Equipment Return Procedure

To return equipment to Symmetricom for repair:

1. Call Symmetricom Global Services (SGS) at 888-367-7966 (toll-free in USA only), 

408-428-7907, or +49 700 3288 6435 in Europe, Middle East, or Africa to obtain 
a return material authorization number (RMA) before returning the product for 
service. 

You can request an RMA on the internet at 
https://www.symmetricom.com/Support/req_repair.htm. 

Retain the assigned RMA number for future reference.

2. Provide a description of the problem, product item number, serial number, and 

warranty expiration date.

3. Provide the return shipping information (customer field contact, address, 

telephone number, and so forth.)

4. Ship the product to Symmetricom, transportation prepaid and insured, with the 

Return Material Authorization (RMA) number and item numbers or part numbers 
clearly marked on the outside of the container to the address given with the RMA.

Repaired equipment is returned to you with shipping costs prepaid by 
Symmetricom.

Manual Updates

From time to time, this manual may be updated. The current version of the manual 
is available for downloading in pdf format at Symmetricom’s website at 

www.symmetricom.com

. After you download a manual, you can view it on your 

computer screen or you can print it out. 

Note:

 If you are downloading a manual for the first time, you need to 

register on Symmetricom’s website. If you are currently registered, 
log in and download the manual update.

Summary of Contents for EDGE CLOCK 1000

































































































































































































































Reviews:

No comments

Related manuals for EDGE CLOCK 1000

Medion LIFE E66130 Instruction Manual preview
LIFE E66130
Brand: Medion Pages: 129
Amano CP-3000 User Manual preview
CP-3000
Brand: Amano Pages: 76
Canon CT-50 User Manual preview
CT-50
Brand: Canon Pages: 4
Philips AJ-5030 Brochure preview
AJ-5030
Brand: Philips Pages: 2
Auriol 273639 Usage And Safety Instructions preview
273639
Brand: Auriol Pages: 75
Auriol 283736 Operation And Safety Notes preview
283736
Brand: Auriol Pages: 44
Auriol Z30239A Operation And Safety Notes preview
Z30239A
Brand: Auriol Pages: 62
Auriol Z31408A Operation And Safety Notes preview
Z31408A
Brand: Auriol Pages: 97
Auriol HG02918A Operation And Safety Notes preview
HG02918A
Brand: Auriol Pages: 202
Extron electronics CLK 100 Specification Sheet preview
CLK 100
Brand: Extron electronics Pages: 1
Casio PQ-75 Operation Manual preview
PQ-75
Brand: Casio Pages: 3
IKEA BAJK Quick Start Manual preview
BAJK
Brand: IKEA Pages: 8
TFA 60.2505 Operating Instructions Manual preview
60.2505
Brand: TFA Pages: 32
iHome HBH34 Staff Quick Start Manual preview
HBH34
Brand: iHome Pages: 3
RCA RP5420 Specification Sheet preview
RP5420
Brand: RCA Pages: 2
Sylvania JUMBO SCR1206PL Instruction Manual preview
JUMBO SCR1206PL
Brand: Sylvania Pages: 8
La Crosse 404-4525 Manual preview
404-4525
Brand: La Crosse Pages: 2
Vextra VX504 Operating Instructions preview
VX504
Brand: Vextra Pages: 2

Brands by name

Popular brands

Load more brands