manualshive.com logo in svg

Symmetricom EDGE CLOCK 1000, User Manual

The Symmetricom EDGE CLOCK 1000 is a cutting-edge device that offers impeccable time synchronization. With its advanced features and precise timekeeping capabilities, this product ensures seamless integration into any network environment. Unlock the full potential of your device with the comprehensive User Manual, available for free download at our website manualshive.com.

Share
Download
background image

Chapter 1 Overview of the TimeProvider

SNMP – Simple Network Management Protocol

28

 

TimeProvider User’s Guide

097-58001-02 Revision G – April 2008

SNMP – Simple Network Management Protocol 

The TimeProvider offers two versions of SNMP: v2 and v3. SNMP v3 software 
offers additional security with authentication and privacy parameters. The security 
feature allows secure transactions to provide protection against modification of 
information, masquerade, and message stream modification. 

Simple Network Management Protocol (SNMP) is based on a client-server 
query-response mode. A manager is the client generating the queries, while an 
agent is the server generating the responses.

The TimeProvider SNMP is an SNMP agent that requires Ethernet connectivity. If 
SNMP is present, port 161 becomes the port of standard SNMP interactive 
communications, while port 162 becomes the trap port. Since the TimeProvider 
SNMP supports all existing functions, full system control of the TimeProvider is 
maintained through SNMP.

The TimeProvider implements an SNMP agent. A Management Information Base 
(MIB) browser or the SNMP Manager is used to access, retrieve, and query 
information defined by the MIB. 

All reports, queries, autonomous messages, control, provisioning, and administration 
(except for communication port parameters, Set User ID/Password, Set IP 
assignments, Reset connection, and SNMP community settings) are available 
through SNMP. Refer to the 

TimeProvider TL1 Reference Guide 

for more 

information.

Physical Description

The TimeProvider consists of a shelf, plug-in cards, connector adapter panels for 
the cards, cables, hardware, and software. The TimeProvider is available in two 
configurations: front access (Model 1000) and rear access (Model 1100), as shown 
in 

Figure 1-1

 and 

Figure 1-2

. 

Figure 1-4

 illustrates the location of the connectors, cards, and modules in the 

TimeProvider 1000. 

Summary of Contents for EDGE CLOCK 1000

































































































































































































































Reviews:

No comments

Related manuals for EDGE CLOCK 1000

PURE Siesta Rise ZDD055200 Instruction Manual preview
Siesta Rise ZDD055200
Brand: PURE Pages: 24
Progetti H:M:S: Directions preview
H:M:S:
Brand: Progetti Pages: 2
Aim CR1009W User Manual preview
CR1009W
Brand: Aim Pages: 12
TFA 60.2531 Instruction Manual preview
60.2531
Brand: TFA Pages: 48
GPX CRCD2805 Instruction Manual preview
CRCD2805
Brand: GPX Pages: 2
Sangean RCR-28 User Manual preview
RCR-28
Brand: Sangean Pages: 15
Amano PIX-200 Operation Manual preview
PIX-200
Brand: Amano Pages: 48
Galeria Selection 4017805515024 Operating Manual preview
4017805515024
Brand: Galeria Selection Pages: 10
TFA 60.2555 Instruction Manual preview
60.2555
Brand: TFA Pages: 46
Techno Line Dream Mate Pro Instruction Manual preview
Dream Mate Pro
Brand: Techno Line Pages: 7
La Crosse Technology Soluna C79141 Setup Manual preview
Soluna C79141
Brand: La Crosse Technology Pages: 24
Technoline WT 498 Instruction Manual preview
WT 498
Brand: Technoline Pages: 25
Auriol Z30300B Manual preview
Z30300B
Brand: Auriol Pages: 47
Sanyo LC85632 Manual preview
LC85632
Brand: Sanyo Pages: 34
Honeywell PCR201W User Manual preview
PCR201W
Brand: Honeywell Pages: 9
Scarlett SC-852 Instruction Manual preview
SC-852
Brand: Scarlett Pages: 3
Naxa NRC-176 Instruction Manual preview
NRC-176
Brand: Naxa Pages: 13
KREAFUNK aWAKE Operation Manual preview
aWAKE
Brand: KREAFUNK Pages: 46

Brands by name

Popular brands

Load more brands