Symantec 4400 Series, Installation Manual

Page: 32 / 100

28 Appliance setup and initial system configuration
Connecting to the appliance
reboots or shutdowns. The same interface is available on all appliances. You can
manage many appliances, one-by-one using the SGMI. For a detailed description
of the SGMI, see the
Symantec Clientless VPN Gateway Administrator’s Guide .
Connecting to the appliance
After initial setup and reboot, you are ready to configure your appliance. For
optimal screen resolution, set your display settings to a minimum of 1024 x 768.
Note: If you are going to manage your Clientless VPN Gateway from a network
that is not directly connected to the appliance, you must configure your security
gateway to allow HTTPS on port 779.
Before you begin, you need the following information:
■
User name (admin) and password you received when you set up the
appliance.
■
List of all the required IP addresses.
Fill out the worksheets in Appendix A to gather your information.
■
If you have your license files, you can upload them on SGMI Server tab
License option or you can use the 30-day evaluation (optional). See
“Using
the Symantec License Request & Maintenance Web site” on page 74.
To connect to the Clientless VPN Gateway appliance
1 Browse to the IP address of the appliance you want to configure. The path is:
https://<IP address of the Symantec Clientless VPN Gateway 4400
Series>:779/
2 In the Log on dialog box, do the following:
■
In the user name text box, type admin.
■
In the password text box, type the password you received and wrote
down during the appliance LCD setup.
■
Click Login.
The SGMI displays.
For a detailed description of the SGMI, see the Symantec Clientless VPN Gateway
Administrator’s Guide .