Symantec 20097684 - Norton Ghost 15.0 Manual Download Page 6 | Manualshive

Page: 6 / 213

background image

Maintenance agreement resources

If you want to contact Symantec regarding an existing maintenance agreement,
please contact the maintenance agreement administration team for your region
as follows:

[email protected]

Asia-Pacific and Japan

[email protected]

Europe, Middle-East, and Africa

[email protected]

North America and Latin America

Additional enterprise services

Symantec offers a comprehensive set of services that allow you to maximize your
investment in Symantec products and to develop your knowledge, expertise, and
global insight, which enable you to manage your business risks proactively.

Enterprise services that are available include the following:

These solutions provide early warning of cyber attacks, comprehensive threat
analysis, and countermeasures to prevent attacks before they occur.

Symantec Early Warning Solutions

These services remove the burden of managing and monitoring security devices
and events, ensuring rapid response to real threats.

Managed Security Services

Symantec Consulting Services provide on-site technical expertise from
Symantec and its trusted partners. Symantec Consulting Services offer a variety
of prepackaged and customizable options that include assessment, design,
implementation, monitoring, and management capabilities. Each is focused on
establishing and maintaining the integrity and availability of your IT resources.

Consulting Services

Educational Services provide a full array of technical training, security
education, security certification, and awareness communication programs.

Educational Services

To access more information about Enterprise services, please visit our Web site
at the following URL:

www.symantec.com

Select your country or language from the site index.

«
...
4
5
6
7
8
...
»

Summary of Contents for 20097684 - Norton Ghost 15.0






















































































































































































































Reviews:

No comments

Related manuals for 20097684 - Norton Ghost 15.0

Brand: Nortel Pages: 374

Universal Storage Platform VM

Brand: Hitachi Pages: 62

Universal Storage Platform V

Brand: Hitachi Pages: 102

Brand: Hitachi Pages: 205

Brand: Seagate Pages: 1

ZENWORKS APPLICATION VIRTUALIZATION - V8.0.3 INTEGRATION AND STREAMING GUIDE

Brand: Novell Pages: 36

ZENworks 10 Configuration Management

Brand: Novell Pages: 32

ZENWORKS LINUX MANAGEMENT 7.2 IR2 - 07-20-2009

Brand: Novell Pages: 134

ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3 30-03-2010

Brand: Novell Pages: 200

OPEN WORKGROUP SUITE SMALL BUSINESS EDITION 2.0

Brand: Novell Pages: 77

LINUX ENTERPRISE REAL TIME 10 SP1

Brand: Novell Pages: 7

LINUX ENTERPRISE SERVER 10 - STORAGE ADMINISTRATION GUIDE FOR EVMS

Brand: Novell Pages: 93

OPEN ENTERPRISE SERVER 2 SP 2 - CLUSTER SERVICES 1.8.7 FOR LINUX

Brand: Novell Pages: 254

LINUX ENTERPRISE DESKTOP 10

Brand: Novell Pages: 9

IFOLDER 3.6 - SECURITY ADMINISTRATION

Brand: Novell Pages: 22

LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009

Brand: Novell Pages: 236

GROUPWISE 7 - MULTI-SYSTEM ADMINISTRATION

Brand: Novell Pages: 75

Brand: Extron electronics Pages: 124

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands