Symantec 20097684 - Norton Ghost 15.0, Manual

Page: 189 / 213

See “Using the pcAnywhere thin host for a remote recovery” on page 189.
See “Mapping a network drive from within Symantec Recovery Disk” on page 191.
See “Configuring network connection settings” on page 192.
Starting networking services
If you need to start networking services, you can do so manually.
To start networking services
◆ On the Network panel, click Start My Networking Services.
To verify the connection to the network, you can map a network drive.
See “Mapping a network drive from within Symantec Recovery Disk”
on page 191.
Using the pcAnywhere thin host for a remote recovery
The Symantec Recovery Disk CD includes a pcAnywhere thin host. It lets you
remotely access a computer in the recovery environment. The pcAnywhere thin
host contains the minimum settings that are needed to support a single-use remote
control session. The thin host requires an IP address for hosting a remote control
session.
Note:
You cannot deploy a thin host to Symantec Recovery Disk. The thin host
can only be started from the Symantec Recovery Disk CD to host a remote control
session in Symantec Recovery Disk. The thin host in Symantec Recovery Disk
does not support file transfers and cannot be used to add drivers for network or
storage devices.
After you start the thin host from Symantec Recovery Disk, it waits for a
connection from a remote computer. You can connect to the thin host to remotely
manage a recovery or to perform other tasks in Symantec Recovery Disk. You
must use Symantec pcAnywhere to connect to the thin host.
To start the pcAnywhere thin host
1
On Network panel, in the recovery environment, click Start the pcAnywhere
Thin Host.
2 The networking services are started, if necessary. The thin host waits for a
connection.
189 Recovering a computer
About using the networking tools in Symantec Recovery Disk