manualshive.com logo in svg

Symantec 20097684 - Norton Ghost 15.0, Manual

Get the most comprehensive user manual for Symantec 20097684 - Norton Ghost 15.0 for free! Whether you're new to the software or a seasoned user, our manual covers everything you need to know. Download it now from our website and unlock the full potential of this powerful software.

Share
Download
background image

4. Run the LightsOut Restore wizard by going to the Windows Start menu and
selecting Programs > Symantec > Norton Ghost 15.0. This installs the Symantec
recovery environment to the local file system, and creates an entry in the Windows
boot menu that can be used to boot to this environment.

5. When either file or system recovery is needed, use the RILO or DRAC device to
connect to the remote server and either power on or reboot the system.

6. During the remote server boot process, select the Symantec recovery
environment from the boot menu. The remote server will then proceed to boot to
the Symantec recovery environment (at which point, connection through RILO
or DRAC will be lost). As the Symantec recovery environment starts, a pcAnywhere
thin host will automatically start (unless this was disabled through the LightsOut
Restore wizard).

7. Use pcAnywhere to connect to the remote server pcAnywhere thin host.

8. Through pcAnywhere, use the recovery environment to restore individual files,
or entire partitions.

Starting the LightsOut Restore Wizard

If you have not already licensed Norton Ghost, the first time you run the LightsOut
Restore wizard, you will be prompted to install a license file or a product license
key.

Starting the LightsOut Restore Wizard

1

From Windows, click Start > All Programs > Symantec > Norton Ghost 15.0
> LightsOut Restore Setup.

2

If the product is not licensed, the Install License File dialog appears. Do one
of the following:

■

If you have a license file, browse to its location.

■

If you have the serial number that came with Norton Ghost, click Get
License.

■

If you do not have a license file, click Buy Now to purchase the product.

■

If you received a product license key, enter the key in the appropriate
fields.

3

Depending on which option you clicked in the previous step, click Activate,
or click Later.

4

You might be asked to specify the source location of a Symantec Recovery
Disk. You can use your Norton Ghost product CD. Specify the location, and
then click Next.

Recovering files, folders, or entire drives

Restoring using LightsOut Restore

168

Summary of Contents for 20097684 - Norton Ghost 15.0






















































































































































































































Reviews:

No comments

Related manuals for 20097684 - Norton Ghost 15.0

Canon iR2270 Series Product Description preview
iR2270 Series
Brand: Canon Pages: 2
Canon Pixma Pro9500 Series Manual preview
Pixma Pro9500 Series
Brand: Canon Pages: 31
Canon PowerShot SD430 DIGITAL ELPH WIRELESS Software & Wireless Manual preview
PowerShot SD430 DIGITAL ELPH WIRELESS
Brand: Canon Pages: 130
Canon PowerShot SD880 IS Digital ELPH Software Starter Manual preview
PowerShot SD880 IS Digital ELPH
Brand: Canon Pages: 83
Canon Selphy CP600 Printer Software Manual preview
Selphy CP600
Brand: Canon Pages: 34
Canon N1240U - CanoScan Flatbed Scanner User Manual preview
N1240U - CanoScan Flatbed Scanner
Brand: Canon Pages: 109
Ulead COOL 3D-PLUG-IN MADNESS II Manual preview
COOL 3D-PLUG-IN MADNESS II
Brand: Ulead Pages: 10
Waves Multimaximizer L3-16 User Manual preview
Multimaximizer L3-16
Brand: Waves Pages: 23
IBM E02D1LL-E - Rational Rose Enterprise Installation Manual preview
E02D1LL-E - Rational Rose Enterprise
Brand: IBM Pages: 46
FARONICS POWER SAVE MAC Manual preview
POWER SAVE MAC
Brand: FARONICS Pages: 34
M-Audio GForce M-Tron Pro Quick Start Manual preview
GForce M-Tron Pro
Brand: M-Audio Pages: 4
M-Audio DRUM AND BASS RIG (German) Kurzanleitung preview
DRUM AND BASS RIG
Brand: M-Audio Pages: 3
Elgato EyeTV Hybrid Hardware Reference Manual preview
EyeTV Hybrid
Brand: Elgato Pages: 5
AirLive AIRTV-1000U User Manual preview
AIRTV-1000U
Brand: AirLive Pages: 19
Intel Solid-State Drive Toolbox User Manual preview
Solid-State Drive Toolbox
Brand: Intel Pages: 32
GNOME 2.4 User Manual preview
2.4
Brand: GNOME Pages: 213
Xerox DC 220 ST Tips And Tricks preview
DC 220 ST
Brand: Xerox Pages: 4
GRASS VALLEY MEDIAEDGE-SWT4 Datasheet preview
MEDIAEDGE-SWT4
Brand: GRASS VALLEY Pages: 2

Brands by name

Popular brands

Load more brands