manualshive.com logo in svg

Symantec 20097684 - Norton Ghost 15.0, Manual

Get the most comprehensive user manual for Symantec 20097684 - Norton Ghost 15.0 for free! Whether you're new to the software or a seasoned user, our manual covers everything you need to know. Download it now from our website and unlock the full potential of this powerful software.

Share
Download
background image

recover your computer or other hard drive back to the state it was in when the
recovery point was created.

See

“Recovering a computer from a virtual disk file”

on page 183.

To recover a computer

1

Start the computer by using the Symantec Recovery Disk CD.

See

“Starting a computer by using Symantec Recovery Disk”

on page 174.

2

On the Home panel, click Recover My Computer.

If your recovery points are stored on a CD or DVD and you only have one
CD/DVD drive, you can eject the Symantec Recovery Disk CD now. Insert the
CD or DVD that contains your recovery points.

3

On the Welcome page of the wizard, click Next.

4

Do one of the following:

■

If Symantec Recovery Disk located recovery points, proceed to step 6

■

If Symantec Recovery Disk did not locate any recovery points, proceed to
the next step.

5

In the View recovery points by list, select one of the following options:

Displays all of the discovered recovery points in the order in
which they were created.

If no recovery points were discovered, the table is empty. If such
cases, you can search all local drives on the computer or browse
to find a recovery point.

In the Select source folder list, do one of the following:

■

Click All local drives to view a list of all available recovery
points that may exist on your computer's local drives.

■

Click Browse to locate a recovery point on a local drive or a
network folder.

Date

Lets you browse to another location to select a recovery point
file (.v2i).

Select this option, and then click Browse. Locate and select a
recovery point file (.v2i), and then click Open.

If necessary, click Map a network drive. Specify a shared network
folder path and assign it a drive letter. You can then browse the
folder location for the file you want.

File name

179

Recovering a computer

Recovering a computer

Summary of Contents for 20097684 - Norton Ghost 15.0






















































































































































































































Reviews:

No comments

Related manuals for 20097684 - Norton Ghost 15.0

Casio ADD-IN INSTALLER User Manual preview
ADD-IN INSTALLER
Brand: Casio Pages: 18
Ulead GIF ANIMATOR 4.0 User Manual preview
GIF ANIMATOR 4.0
Brand: Ulead Pages: 64
Red Hat CERTIFICATE 7.3 RELEASE NOTES Release Note preview
CERTIFICATE 7.3 RELEASE NOTES
Brand: Red Hat Pages: 24
Navman SmartST 2009 User Manual preview
SmartST 2009
Brand: Navman Pages: 82
EverFocus Flex1.0 User Manual preview
Flex1.0
Brand: EverFocus Pages: 123
Adaptec Disk Array Administrator User Manual preview
Disk Array Administrator
Brand: Adaptec Pages: 139
3Com 3C19250 - USB Ethernet Network Interface Card User Manual preview
3C19250 - USB Ethernet Network Interface Card
Brand: 3Com Pages: 16
Barco Projector Toolset Reference Manual preview
Projector Toolset
Brand: Barco Pages: 245
Alpine NVD-A211 SMART MAP PRO Owner'S Manual preview
NVD-A211 SMART MAP PRO
Brand: Alpine Pages: 95
HP Kayak XA 05xx Installation Manual preview
Kayak XA 05xx
Brand: HP Pages: 23
HP Insight Dynamics 6.2 Getting Started Manual preview
Insight Dynamics 6.2
Brand: HP Pages: 54
HP Kayak XA User Manual preview
Kayak XA
Brand: HP Pages: 148
HP J4813A User Manual preview
J4813A
Brand: HP Pages: 144
HP HP-UX 11i Administrator'S Manual preview
HP-UX 11i
Brand: HP Pages: 184
HP j6700 Service Handbook preview
j6700
Brand: HP Pages: 152
HP HP Integrated Lights-Out User Manual preview
HP Integrated Lights-Out
Brand: HP Pages: 410
HP Image Library Administrator'S Manual preview
Image Library
Brand: HP Pages: 66
Lenovo ThinkPad R400 Hardware Maintenance Manual preview
ThinkPad R400
Brand: Lenovo Pages: 302

Brands by name

Popular brands

Load more brands