manualshive.com logo in svg

Symantec 20097684 - Norton Ghost 15.0, Manual

Get the most comprehensive user manual for Symantec 20097684 - Norton Ghost 15.0 for free! Whether you're new to the software or a seasoned user, our manual covers everything you need to know. Download it now from our website and unlock the full potential of this powerful software.

Share
Download
background image

Testing Symantec Recovery Disk

You should test the Symantec Recovery Disk CD to ensure that the recovery
environment runs properly on your computer.

Note:

Depending on which version of the product you have purchased, Symantec

Recovery Disk is either included on your product CD, or as a separate CD. You
should place the CD containing Symantec Recovery Disk in a safe place.

Testing the Symantec Recovery Disk CD lets you identify and solve the following
types of problems:

■

You cannot start Symantec Recovery Disk.

See

“To configure a computer to boot from a CD”

on page 175.

■

You do not have the necessary storage drivers to access recovery points on
the computer.

■

You need information about your system to help you run Symantec Recovery
Disk.

See

“If driver validation fails”

on page 28.

To test Symantec Recovery Disk

1

Run the driver validation tool to test whether Symantec Recovery Disk works
with the network cards and storage devices on the computer.

2

Start your computer using the Symantec Recovery Disk CD.

See

“Starting a computer by using Symantec Recovery Disk”

on page 174.

3

When you have started Symantec Recovery Disk, do one of the following:

■

If you want to store recovery points on a network, run a mock restore of
a recovery point that is stored on a network to test the network connection.

■

If you want to store recovery points on a computer, run a mock restore of
a recovery point that is stored locally to test the local hard drive
connection.

If driver validation fails

The driver validation test verifies whether the drivers for all storage devices and
network cards in use by the computer are available in Symantec Recovery Disk.
If the drivers are available on the recovery disk, you receive a validation message.
If any drivers are not included on the recovery disk, the Driver Validation Results
dialog box appears.

Ensuring the recovery of your computer

Testing Symantec Recovery Disk

28

Summary of Contents for 20097684 - Norton Ghost 15.0






















































































































































































































Reviews:

No comments

Related manuals for 20097684 - Norton Ghost 15.0

3Com IntelliJack NJ200 Supplementary Manual preview
IntelliJack NJ200
Brand: 3Com Pages: 14
Extreme Networks ExtremeWare 7.0.0 Command Reference Manual preview
ExtremeWare 7.0.0
Brand: Extreme Networks Pages: 1598
Crestron e-control Database Manager User Manual preview
e-control Database Manager
Brand: Crestron Pages: 94
FARONICS DEEP FREEZE - INTEGRATING WITH ALTIRIS... Manual preview
DEEP FREEZE - INTEGRATING WITH ALTIRIS...
Brand: FARONICS Pages: 22
IBM E02D1LL-E - Rational Rose Enterprise Installation Manual preview
E02D1LL-E - Rational Rose Enterprise
Brand: IBM Pages: 46
Patton electronics ForeSight 6100 Element Management System User Manual preview
ForeSight 6100 Element Management System
Brand: Patton electronics Pages: 70
MACROMEDIA FLASH 8-LEARNING ACTIONSCRIPT 2.0 IN FLASH Manual preview
FLASH 8-LEARNING ACTIONSCRIPT 2.0 IN FLASH
Brand: MACROMEDIA Pages: 830
NUANCE OmniPage Direct Manual preview
OmniPage Direct
Brand: NUANCE Pages: 44
Apricorn SMART-ER User Manual preview
SMART-ER
Brand: Apricorn Pages: 20
Apricorn EZ Gig II User Manual preview
EZ Gig II
Brand: Apricorn Pages: 67
Red Hat CLUSTER MANAGER - INSTALLATION AND Administration Manual preview
CLUSTER MANAGER - INSTALLATION AND
Brand: Red Hat Pages: 190
Draytek Smart Monitor User Manual preview
Smart Monitor
Brand: Draytek Pages: 73
Symantec BRIGHTMAIL GATEWAY SMALL BUSINESS EDITION Datasheet preview
BRIGHTMAIL GATEWAY SMALL BUSINESS EDITION
Brand: Symantec Pages: 4
Symantec Fax Sharing User Manual preview
Fax Sharing
Brand: Symantec Pages: 30
Royal Registerlink User Manual preview
Registerlink
Brand: Royal Pages: 30
GRASS VALLEY NetConfig Instruction Manual preview
NetConfig
Brand: GRASS VALLEY Pages: 44
Autodesk AUTOCAD ELECTRICAL - Brochure preview
AUTOCAD ELECTRICAL -
Brand: Autodesk Pages: 16
Autodesk AutoCAD Driver Operation Manual preview
AutoCAD Driver
Brand: Autodesk Pages: 22

Brands by name

Popular brands

Load more brands