Symantec 20097684 - Norton Ghost 15.0 Manual Download Page 115

Page: 115 / 213

Monitoring the status of
your backups

This chapter includes the following topics:

■

About monitoring backups

■

Monitoring backup protection from the Home page

■

Monitoring backup protection from the Status page

■

About SNMP traps

■

Customizing the status reporting of a drive (or file and folder backups)

■

Viewing drive details

■

Improving the protection level of a drive

■

About using event log information to troubleshoot problems

About monitoring backups

You should monitor your backups to ensure that you can effectively recover lost
data when you need it.

The Home page provides a general status of your backup protection. The Status
page provides details about which drives are protected, as well as a calendar view
of past and future backups.

Note:

In addition to ensuring that you back up each drive, carefully review and

follow best practices for backing up your computer.

Chapter

Summary of Contents for 20097684 - Norton Ghost 15.0






















































































































































































































Search results

Summary of Contents for 20097684 - Norton Ghost 15.0

Reviews:

Related manuals for 20097684 - Norton Ghost 15.0

Brands by name

Popular brands

Symantec 20097684 - Norton Ghost 15.0, Manual

Search results

Summary of Contents for 20097684 - Norton Ghost 15.0

Reviews:

Related manuals for 20097684 - Norton Ghost 15.0

Brands by name

Popular brands