Symantec 20097684 - Norton Ghost 15.0, Manual

Page: 154 / 213

To edit a virtual conversion job
1 On the Tasks page, click Run or Manage Virtual Conversions.
2 Select the name of a conversion job that you want to edit.
3
Do one of the following:
On the toolbar, click Change Schedule.
Make changes to the conversion schedule,
and then click OK.
To change the schedule
On the toolbar, click Edit Settings.
Make the changes you want in each wizard
pane, and then click Finish.
To change the job settings
Deleting a virtual conversion job
You can delete conversion jobs you no longer need or use.
When you delete a conversion job, no recovery points or virtual disks are deleted
from the storage location. Only the conversion job itself is deleted.
To delete a virtual conversion job
1 On the Tasks page, click Run or Manage Virtual Conversions.
2
Select the names of one or more conversion jobs that you want to delete.
3
On the toolbar, click Remove.
4 Click Yes to confirm the deletion.
About managing file and folder backup data
Because drive-based backups capture your entire hard drive, the size of a recovery
point is typically much larger than the data that is captured during the file and
folder backups. However, file and folder backup data can take up significant disk
space if it is not managed. For example, audio files, video files, and photographs
are typically large files.
You must decide how many versions of backup files that you want to keep. This
decision can depend on how frequently you change the content of your files and
how frequently you run the backups.
Managing backup destinations
About managing file and folder backup data
154