Symantec 20097684 - Norton Ghost 15.0 Manual Download Page 78

Page: 78 / 213

In the Backup Destination panel, set the options you want, then click Next.

Lets you browse to and specify the
location where you want to store the
independent recovery point.

Folder field

Lets you map a network drive by using the
UNC path of the computer on which you
want to store the recovery point.

For example,
\\computer_name\share_name or
\\IP_address\share_name.

Map a network drive

Lets you edit the recovery point file name.
To do this, select a drive, click Rename,
type a new file name, and then click OK.

Recovery point file names field

Backing up entire drives

About running a one-time backup from Symantec Recovery Disk

Summary of Contents for 20097684 - Norton Ghost 15.0






















































































































































































































Search results

Summary of Contents for 20097684 - Norton Ghost 15.0

Reviews:

Related manuals for 20097684 - Norton Ghost 15.0

Brands by name

Popular brands

Symantec 20097684 - Norton Ghost 15.0, Manual

Search results

Summary of Contents for 20097684 - Norton Ghost 15.0

Reviews:

Related manuals for 20097684 - Norton Ghost 15.0

Brands by name

Popular brands