Symantec 20097684 - Norton Ghost 15.0 Manual Download Page 194

Page: 194 / 213

A user-assigned comment associated with the recovery point

Description

The total size (in megabytes) of the recovery point

Size

The date and time that the recovery point file was created

Created

The compression level that is used in the recovery point

Compression

Whether the entire recovery point file is spanned over
several files

Split across multiple files

The password protection status of the selected drive

Password protected

The encryption strength that is used with the recovery point

Encryption

The version number associated with the recovery point

Version

The name of the computer on which the recovery point was
created

Computer name

If you enabled search engine support for the recovery point,
this property is displayed.

Search engine support

Identifies the application (Norton Ghost) that was used to
create the recovery point.

Created by

To view the properties of a recovery point

In the Recovery Point Browser, in the tree panel, select the recovery point
that you want to view.

Do one of the following:

■

On the File menu, click Properties.

■

Right-click the recovery point, and then click Properties.

Viewing the properties of a drive within a recovery point

You can view the following properties of a drive within a recovery point:

A user-assigned comment associated with the recovery
point.

Description

The original drive letter that was assigned to the drive.

Original drive letter

The cluster size (in bytes) that is used in a FAT, FAT32, or
NTFS drive.

Cluster size

The file system type that is used within the drive.

File system

Recovering a computer

About viewing properties of recovery points and drives

194

Summary of Contents for 20097684 - Norton Ghost 15.0






















































































































































































































Search results

Summary of Contents for 20097684 - Norton Ghost 15.0

Reviews:

Related manuals for 20097684 - Norton Ghost 15.0

Brands by name

Popular brands

Symantec 20097684 - Norton Ghost 15.0, Manual

Search results

Summary of Contents for 20097684 - Norton Ghost 15.0

Reviews:

Related manuals for 20097684 - Norton Ghost 15.0

Brands by name

Popular brands