Micro Weld Heads
CWS
−
D100
−
B Welding System
2005 Swagelok Company, All rights reserved
September 2005
4-4
Installing the Micro Weld Head
1.
Using the micro fixture tool, turn the drive gear on the
base of the micro weld head to align the rotor opening
to the weld head housing opening. See Figure 4-4(A)
and Figure 4-4(B), showing views of the rotor
misaligned and in proper alignment.
The drive gear on the base of the micro weld head must
be aligned so that it meshes with the drive pins on the
motor module housing.
2.
Locate the shielding gas port on the micro weld head
and verify that the O-ring is in place. See Figure 4-5.
The O-ring seals the gas port. A valve in the port opens
the gas flow through the motor module. The valve
opens when the micro weld head is properly connected
to the motor module.
3.
Align the connecting surfaces of the micro weld head
and motor module. See Figure 4-5.
Figure 4-5 O-ring and Mating Connections
O-ring
Mating Connections
Valve
Figure 4-4 Rotor Manual Adjustment
B
Drive Gear
Wrong
Correct
A
Micro
Fixture
Tool