Svantek SV 104BIS, User Manual

Page: 97 / 180

97 SV 104BIS User Manual
where:
fname - name containing not more than eight characters,
offset
- offset from the beginning of the file,
length - number of bytes to read,
#4,4; the current settings file,
#4,4,?;
size of the current settings file,
#4,4,offset,length; the part of current settings file,
where:
offset - offset from the beginning of the current settings file,
length - number of bytes to read.
Note: The "\" character is treated as the file name of the catalogue and must be sent
to the instrument.
All data words are sent as <LSB> , <MSB> .
When an error is detected in the file specification or data, the instrument will send:
#4,?;
The catalogue of the files is a set of the records containing 16 words (16 bits each). Each record describes
one file saved in the instrument’s Flash
-disc or RAM. The record structure is as follows:
words 0 - 3 8 characters of the file name,
word 4 file type (binary number),
word 5 reserved,
word 6 the least significant word of the file size,
word 7 the most significant word of the file size,
words 8 - 15 reserved.
A.6 FUNCTION #5 -
STATISTICAL ANALYSIS RESULTS READ
-
OUT
#5 function enables one to read out the statistical analysis results.
#5 function format is defined as follows:
#5,p;
where:
p - the number of the profile (1, 2 or 3)
The device responds, sending the current classes of the statistics in the following format:
#5,p;<Status Byte> <LSB of the transmission counter> <MSB of the transmission counter>
<NofClasses><BottomClass><ClassWidth><Counter of the class> (...) <Counter of the class>
Status Byte gives the information about the current state of the instrument.
D7 D6 D5 D4 D3 D2 D1 D0
where:
D7 = 0 means "overload does not happen",