Svantek SV 104BIS, User Manual

Page: 128 / 180

128
SV 104BIS User Manual
APPENDIX C TECHNICAL SPECIFICATIONS
C.1 S
PECIFICATION OF
SV 104BIS
AS
DOSIMETER
C.1.1 Specification of SV 104BIS as dosimeter in standard configuration
Statement of performance
The SV 104BIS dosimeter meets also requirements of the: IEC 61252 ed1.2 (2017)
SV 104BIS dosimeter with all listed below accessories meets requirements of IEC 61672-1:2013 for Class 2
Group X instruments.
SV 104BIS dosimeter meets also requirements of the next standards: ANSI/ASA S1.25-1991 (R2017), IEC
61010-1 (2010), ANSI/UL 61010-1 and CAN/CSA C22.2 No 61010-1; ATEX/IECEx: IEC 60079-0 ed7.0 (2017),
IEC 60079-11 ed6.0 (2011), CAN/CSA C22.2 No 60079-0, CAN/CSA C22.2 No 60079-11, ANSI/UL 60079-0,
ANSI/UL 60079-11.
Hazardous area installations specific information
SV 104BIS marking per ATEX/IECEx: I M1 Ex ia I Ma, II 1G Ex ia IIC T4 Ga, -
10°C < T
amb
< +50°C,
Ingress protection:
IP65
Maximum charge input voltage: Um=8.0V
Intrinsic safety standards that SV 104BIS complies with:
•
EN IEC 60079-0:2018, EN 60079-11:2012, EN 60079-26:2015, EN 50303:2000
•
IEC 60079-0 ed7.0 (2017), IEC 60079-11 ed6.0 (2011), IEC 60079-26 ed3 (2014)
The dedicated charging docking stations are SB 104B-1 or SB 104B-5 .
Note: The equipment shall only be charged in non-
hazardous area by manufacturer’s chargers on
a fireproof surface.
Configuration of the complete SLM and with its normal mode of operation:
SV 104BIS
dosimeter/analyser including ST 104B microphone (1/2",
nominal sensitivity 1 mV/Pa, polarization 0 V) and SA 122BIS
windscreen
Recommended calibrator
SV 34B Class 2 acoustic calibrator 114 dB@1000 Hz or equivalent
(not included in the standard set)
Accessories included in SV 104BIS instrument set
ST 104B
½
MEMS microphone
SA 122BIS windscreen