Svantek SV 104BIS User Manual Download Page 49

Page: 49 / 180

104BIS User Manual

Internal

battery

status of the selected instrument. The battery capacity is displayed in

percentage. If battery is close to be empty its colour changes to red.

Internal

memory

status of the selected instrument. The green area and the

percentage display the empty memory capacity.

Dose

alarm

. If dose is above the threshold level the icon is red and the mobile device

starts to vibrate.

Movement

of the controlled person. If the controlled person is moving the icon is

green, otherwise the icon is red.

Someone is using the instrument’s

keyboard

Lockout

status because of other current device control over this instrument.

As an example:

The instrument SV 100A #44897 is switched off.

The instrument SV 100A #44897 is switched on and
measurement is stopped. Battery charging is 95%, free
memory is 99%, no alarm, the controlled person in not
driving a vehicle.

The instrument SV 104B #56400 is switched on and
measurement is running. Current Dose value is
displayed.

The

controlled

person

presses

the

instrument’s

button, and this instrument is already

controlled by another mobile device. Note, that since
scanning t

here may be a few seconds’ delay.

Summary of Contents for SV 104BIS




















































































































































































Search results

Summary of Contents for SV 104BIS

Reviews:

Brands by name

Popular brands

Svantek SV 104BIS, User Manual

Search results

Summary of Contents for SV 104BIS

Reviews:

Brands by name

Popular brands