Svantek SV 104BIS, User Manual

Page: 37 / 180

37 SV 104BIS User Manual
The following screen will be presented:
Figure 4-4 Unit label screens
Unit label screen is moved with the or keys.
To exit the Unit Label screen just shortly press the key. Then SV 104BIS will return to the last presented
VIEW mode.
Note: The personalized Unit Name can be set arbitrarily with Supervisor software.
4.6 M
EASUREMENT SETUP
-
BASIC CONFIGURATION
Press two keys and at the same time. The Load Setup menu will appear with the list of loaded
configuration setups to choose.
Figure 4-5 Load setup menu
To abandon setup selection, press again and at the same time. Otherwise select the required
configuration setup with the key navigating thru the list with the or key.
The following screen will appear, that will allow you to confirm you really want to load the selected setup or
cancel the selection and return to configuration setup list:
UNIT NAME
user programmable
serial number
firmware
version
standards
conformity